Saturday, 31 March 2012

Offset Surface

Go to Insert-->offset/scale-->Offset Surface
In the offset surface command 
in feature bar you can see OUTPUT
You have two options in this,
1.One feature for connected faces 
This option is useful when you have to create the envelope for the particular component as the tolerance purpose.In this all the faces offset with the connectivity.





2.One feature for each face.
You wont see any connectivity in this command.Each face can be offset individually without any connectivity.

Shell Command

Initially create rectangle either through creating a block command or through sketch.
Then open the shell command from
insert-->offset scale-->shell as shown in below
there are two options in the shell command,
1.Remove faces,then shell
This option is useful when you want to remove the inner material and create a thickness for the out wall as shown in below image
the thickness can be variable with the face,
different faces can select for different thickness


2.Shell all the faces.
In this option out body remains same but inner material removed as shown in below image.


By applying this we cant find the shell applied or not but if you see the section for the block you will find the thickness to the walls.

after section only shell can be visible

Sunday, 25 March 2012

Installation of NX6 in Windows 7 (32bit)


This is the procedure for installation of NX6.0 in Windows 7:
The NX folder consists of following items.
Before starting the installation:
Open the nx6.lic file (in Magnitude/Crack folder) with notepad
and edit the host_name as shown below and save it.
Know your Host_name,Host_Id here 
http://unigraphicsbasicsnmaterial.blogspot.in/2012/03/know-your-computer-hostidhostname.html 


Next start the installation:
>Run the Launch file
>Run Install Licence Server
>For language select English (United States) and click Next.
>Select installation folder for license server and click next. (Default is Like C:\Programfiles\UGS\UGSLicensing\ ). Keep the Default.
>After that this will ask you the location of license file. Click Browse and select the license file which you edited and click Next.
>It will ask you to start installation. Select install.


This will install the license server on your computer.
Thereafter start the Installation of Unigraphics NX 6 software :
Click on Install NX.
>For language select English (United States) and click Next.
>During Setup type select Typical and click Next.
>Destination Folder : keep default or you can select other as you wish. click Next.
>During licensing it will ask you to enter server name. This will be like 28000@Host_name(same as the one which you typed in nx6.lic notepad)
>If server name is correct as described above then click Next.
>For language select English or choose as per your requirement click Next.
>After that it setup will ask you to review or change the installation setting.
After installation,
Copy all the files in the Magnitude-->UGS-->NX6-->copy all
Paste in C/programfiles-->UGS-->NX6
Replace all .
Then run the NX6 from start menu and enjoy the Unigraphics.
Please contact me for any clarifications.

Know your Computer Host_ID,Host_Name


To Know your Computer Host ID
1. Open Command Prompt. (Run>cmd>enter)
2. Type ipconfig/all ->enter.
Here
Host Name is your Computer Name. (mine: Sattenapalli)
Physical Address is your Host ID. (mine: 38-6O-77-A3-91-9C)

Back to Installation:
http://unigraphicsbasicsnmaterial.blogspot.in/2012/03/installation-of-nx6-in-windows-7-32bit.html 
Related Posts Plugin for WordPress, Blogger...